Description
The 80T Machinery Equipment Lowbed Trailer gives equipment haulers a 9.64 m loading deck, a standard width of 2.8 m, and side extensions that increase the width to 3.3 m. Its 13 m overall length combines a machinery loading area with mechanical ramps and four container locks for a 20 ft container.
For your next equipment move, start with the dimensions that determine whether the load fits. Compare the machine’s transport length, track or tire width, and weight with the trailer’s deck layout. The listed nominal payload is 80,000 kg; the allowable load for your job must be confirmed against the final configuration and load distribution.
Images of 80T Machinery Equipment Lowbed Trailer
Features of 80T Machinery Equipment Lowbed Trailer
A Lowbed Trailer with Side Extensions for Wider Equipment
A machine can fit the payload category and still need more deck width. This lowbed trailer provides a 2,800 mm standard deck width that increases to 3,300 mm with the side extensions deployed.
The 500 mm increase gives you more width to work with when planning equipment placement. The loading deck measures 9,640 mm long, so you can check the machine’s footprint against the usable platform rather than relying on the trailer’s 13,000 mm overall length.
For tracked equipment, include the track contact length and outside track width in your inquiry. Extension support and the position of concentrated loads need to be checked before the loading arrangement is approved.
A 4 Axle Lowbed Trailer with a Specified Q355 Frame
The main frame uses Q355 steel and measures 550 mm high. The specification lists upper, lower, and middle plate thicknesses of 20 mm, 10 mm, and 14 mm, respectively. H-section side beams measure 300 × 140 mm, and the deck has 5 mm checkered plate.
These details give your purchasing and maintenance teams concrete information to review. They also help distinguish this configuration from quotations that list a tonnage class without identifying the frame material or section dimensions.
Four FUWA axles, each listed at 13T, are paired with spring suspension. Final load approval must consider the complete trailer and tractor combination, including trailer weight, kingpin loading, axle loading, and cargo position.
A Machinery Transport Trailer with Mechanical Ramps
Mechanical ramps provide the loading arrangement for equipment that can climb onto the deck. Before selecting this configuration, check the machine’s ground clearance, approach angle, track or wheel spacing, and climbing capability.
Ramp dimensions, angle, and load rating should be confirmed for the specific equipment. A machine’s total weight alone does not establish whether it can use the ramps.
The deck sits approximately 1,100 mm above ground level. Use this measurement when reviewing the equipment’s loaded height, and confirm the final dimensions for the planned transport arrangement.
A Lowbed Semi Trailer with 20 ft Container Locks
Four container locks are fitted on the loading deck for a 20 ft container. This gives buyers who handle both machinery and containerized cargo an additional use to evaluate within the same trailer specification.
For a container move, confirm the loaded container weight, lock positions, and weight distribution before dispatch. The container locks and machinery loading arrangements serve different purposes; each load needs its own securing plan.
Rope hooks are also included. Confirm suitable rated securement points and equipment for the machinery being transported.
80T Machinery Equipment Lowbed Trailer Specifications
The following specifications describe the listed four-axle configuration. Dimensions are in millimeters unless otherwise noted. Final payload and loading conditions require confirmation for the intended equipment.
| Item | Specification |
|---|---|
| Trailer configuration | 4-axle, 13 m lowbed semi-trailer |
| Listed nominal payload | 80,000 kg, subject to final configuration and load approval |
| Overall dimensions, L × W × H | 13,000 × 2,800 × 3,400 mm |
| Overall width with side extensions | 3,300 mm |
| Loading deck, L × W | 9,640 × 2,800 mm |
| Loading deck width with extensions | 3,300 mm |
| Approximate deck height above ground | 1,100 mm |
| Main frame material | Q355 steel |
| Main frame height | 550 mm |
| Upper / lower / middle plate thickness | 20 / 10 / 14 mm |
| Side beams | 300 × 140 mm, H-section |
| Deck plate | 5 mm checkered plate |
| Loading ramps | Mechanical |
| Axles | 4 × FUWA 13T |
| Suspension | Spring suspension |
| Tires | 295/80R22.5, dual-tire arrangement |
| Spare tire | One included |
| Landing gear | FUWA, 28T capacity, manual operation |
| Paint finish | Primer and finish coat |
| Rope hooks | Included |
| Container locks | Four, for a 20 ft container on the loading deck |
The overall height and deck height describe different measurements. Use the deck height when calculating the machinery’s loaded height. Trailer tare weight, ramp ratings, braking equipment, and coupling details should be confirmed with the final specification.
Robust and Durable, Achieve Exceptional Transport
Start your project today and get a high-performance semi-trailer solution tailored specifically to your unique needs.
Request an 80T Machinery Equipment Lowbed Trailer Quote
Send your equipment details so the quotation can address the load you actually need to move. Include the machine make and model, transport weight, overall dimensions, and track or tire contact dimensions.
Please also provide your tractor model, destination country, route conditions, quantity, and any requirement to carry a 20 ft container. Add photos or a machine drawing if attachments affect the transport footprint.
Request a quote that identifies the final deck layout, ramp specification, allowable payload, and included components.
